Volt Ledger

Distributed Power Generation and the DPCA Campaign

Distributed power generation history: the DPCA (1997-2002) united utilities and makers to cut barriers for onsite generators.

  • Published
  • Volt Ledger Editorial Desk
  • Knowledge

Distributed Power Generation Placed Small Plants Near the Load

Distributed power generation means making electricity at or near the point of use instead of in a distant central station. The U.S. Energy Information Administration defines a distributed generator as a unit located close to the load it serves and interconnected to a distribution or sub-transmission system at 138 kV or less, in glossary material consulted in November 2026. The U.S. Environmental Protection Agency, in material last updated on March 4, 2026, describes the same idea as solar panels or combined heat and power serving a home, business or microgrid, a useful primer on what distributed power is. Connected to lower-voltage distribution lines, such units can support delivery of power to more customers and cut losses along transmission and distribution lines.

Why Did Utilities and Equipment Makers Join the DPCA?

The DPCA gathered the full supply chain because changing power market rules needed utilities, fuel suppliers and equipment makers at the same table. “There is great potential for the distributed generation concept,” said Dan Kincaid, Gas Research Institute power generation business development manager and forum steering committee member, in Power Engineering on November 1, 1997. Representatives from 26 electric and natural gas industry organizations, equipment makers and the federal government had formed a Distributed Generation Forum to study wider use of distributed power generation. The DPCA appears on that forum’s participant list alongside Caterpillar, Solar Turbines, Duke Power and Southern California Edison. Archived descriptions captured in snapshots from 2002 to 2005 list the following member groups.

Member group Role near the customer meter
Electric and gas utilities Deliver power and meet peak demand near load
Consumers Buy onsite units or the services built around them
Equipment manufacturers and suppliers Build generators, engines, turbines and fuel cells
Natural gas transmission pipeline companies Move the fuel feeding gas-based onsite units
Gas and electric marketers Package power and fuel offers for end users
Research organizations Study performance, costs and market applications

What Barriers Was the DPCA Trying to Remove?

Regulation and law held back small generators more than hardware did, in the DPCA’s view. Archived descriptions captured in snapshots from 2002 to 2005 state its goal as removing regulatory and legislative impediments to distributed power technologies. A 2001 hearing record of the House Energy and Air Quality Subcommittee, held on July 27, 2001 and published through GovInfo, shows the same concern at the federal level. Witnesses and members described varying interconnection rules across utilities and states as a burden for independent and distributed generators moving between service areas. The hearing record also notes that distributed generators place smaller facilities closer to load than a central plant and reduce the need for new transmission lines. Project terms still shift with local policy, so buyers need to read the state regulations that govern grid connection and metering before sizing a unit.

How Should Buyers Judge an Onsite Generator Today?

A project pays off when the unit fits the load around it and the utility grants workable connection terms. Residential options described by the Environmental Protection Agency include solar photovoltaic panels, small wind turbines and natural-gas-fired fuel cells. Commercial and industrial sites add combined heat and power, hydropower, biomass combustion, fuel cells and reciprocating engines to the menu of distributed generation technologies. Economics shift with local policy since incentives and tariffs differ by territory, according to the Environmental Protection Agency. In some areas grid operators call on firms to run onsite emergency units at peak hours to keep service steady. Those calls only help the owner when the benefits of distributed power line up with fuel, space and upkeep costs. Combustion units can bring air emissions and cooling water needs, so siting deserves weight alongside first cost.

  1. Match the generator to the load it will actually serve across seasons.
  2. Get interconnection and metering terms in writing before purchase.
  3. Weigh resilience and line-loss value against fuel and upkeep.
  4. Plan maintenance and replacement for the full service life of the unit.

Distributed Power Coalition of America FAQ

What was the Distributed Power Coalition of America?

The Distributed Power Coalition of America was a United States advocacy group for distributed power, founded in 1997. It drew in utilities, equipment makers, pipeline firms, marketers and research bodies. Its goal was to clear regulatory blocks on small onsite generators.

Why did the Distributed Power Coalition of America matter for distributed power generation?

The Distributed Power Coalition of America gave small-generator interests one voice during electric restructuring. It appeared among the participants in a 1997 industry forum on distributed generation. Its case was that onsite units near customer loads could meet peak demand and serve new industrial sites.

Who belonged to the Distributed Power Coalition of America?

The Distributed Power Coalition of America drew members from across the supply chain. Archived descriptions list electric and gas utilities, consumers, equipment manufacturers and suppliers, natural gas transmission pipeline companies, gas and electric marketers, and research organizations. That mix mirrored the spread of firms touched by connection rules.

When did the Distributed Power Coalition of America end, and what should buyers take from it?

The Distributed Power Coalition of America went out of business in 2002, according to archived page descriptions. Its lesson still holds for buyers. Connection terms and backup provisions decide whether a home or business generator pays off, so get them in writing before choosing hardware.